Ignition Coil 479Q-18100 479Q18100 for HAIMA

Car ignition coils can be replaced by themselves. ‌ While the process of replacing an ignition coil requires some hands-on skills and tools, it does not require a deep knowledge of automotive theory. Here are the steps to replace the ignition coil: ‌12

‌ Preparations ‌ : Make sure the vehicle is turned off and cooled and disconnect the battery to prevent electric shock or damage to electronics. Get the tools you need to replace the ignition coil, such as a screwdriver and a new ignition coil.
‌ Open engine cover ‌ : Use a tool to pry open the engine cover and locate the ignition coil.
‌ Removing the old ignition coil ‌ : Remove the screws around the ignition coil using a screwdriver, clean up the dust and debris around the ignition coil, and then remove the old ignition coil.
‌ Install new ignition coil ‌ : Install the new ignition coil in its original position, ensuring that it is securely connected to the spark plug terminal.
‌ fixing and connecting ‌ : Use a suitable sleeve tool to tighten the fixing screw of the ignition coil and connect the ignition coil plug corresponding to each cylinder.
‌ test ‌ : Start the vehicle and check that the ignition coil is working properly to ensure that the engine starts normally and there are no air leaks or other problems.
‌ done ‌ : If all is well, put the hood back on and finish replacing the ignition coil.
While it is possible to replace the ignition coil yourself, it is recommended to be safe during the operation and ensure that all steps are performed correctly to avoid damaging the vehicle or causing personal injury.

The ignition coil is different and it affects the car. ‌ Ignition coil is an important part of the ignition system of the automobile engine. If the ignition coil is faulty, it will affect the power performance of the automobile. If the ignition coil is not the same, it may lead to engine cylinder loss, jitter, poor acceleration, lack of power, increased fuel consumption and other situations. Therefore, it is recommended that when replacing the ignition coil, it is best to choose the original parts to ensure the normal operation of the car. If only one ignition coil is replaced, it is recommended to choose the original part, because the life of the non-original part may not be long, and the pursuit is performance rather than durability. In addition, the ignition coil problem may also be related to the generator. If the power generation is too high, the load of the ignition coil is too heavy, and it is easy to burn out. Therefore, it is best to measure the power generation first. The auxiliary ignition coil has no effect on the power, because the ignition coil is mainly composed of the main coil, the secondary coil, the magnetic core, the switch triode and other auxiliary components, the auxiliary ignition coil is only responsible for ignition, and has no effect on the power.